Extron electronics XTP II CrossPoint 1600, Руководство пользователя

Страница: 103 / 113

XTP II CrossPoint Series • Ethernet Connection 95
Connecting as a Telnet Client
The Microsoft Telnet utility is available from the
C:\
prompt. Telnet allows you to input SIS
commands to the XTP II CrossPoint Series matrix switcher from the PC via the Ethernet link
and the LAN.
Access the
C:\
prompt and start Telnet as follows:
1. Search for
cmd
in the taskbar (Windows 10) or the Start menu (Windows 10-Vista).
2. Select
cmd
.
3. At the
C:\
prompt, type
Telnet
and then press
< Enter >
. The computer returns a
display similar to the one shown in figure 53.
Figure 53. Telnet Window
Telnet Tips
It is not the intention of this guide to detail all of the operations and functionality of Telnet;
however, some basic level of understanding is necessary for operating the
XTP II CrossPoint Series matrix switcher via Telnet.
Open
Connect to the XTP II CrossPoint Series matrix switcher using the
Open
command. Once
you are connected to the matrix switcher, you can enter the SIS commands the same as
you would if you were using the RS-232 of RS-422 link.
Connect to the XTP II CrossPoint Series matrix switcher as follows:
1. At the Telnet prompt, type open
<IP address>
and then press
< Enter >
.
If the matrix switcher is not password-protected , no further prompts are displayed
until you break or disconnect the connection to the matrix switcher.
If the matrix switcher is password-protected , Telnet displays the password prompt.
2. If necessary, at the password prompt, type the appropriate password and then press
< Enter >
.
Connection to the matrix switcher via the Ethernet can be password-protected. There
are two levels of password protection: administrator and user. A person logged on as
an administrator has full access to all matrix switcher switching capabilities and editing
functions. Users can create ties, set mutes, and view all settings with the exception of
passwords. By default, the XTP II CrossPoint Series matrix switcher is shipped with
both passwords set to
<carriage return>
.
Once you are logged in, the matrix switcher returns either
Login Administrator
or
Login
User
. No further prompts are displayed until you break or disconnect the connection to the
XTP II CrossPoint Series matrix switcher.