Communication LED
— (see
on the previous page). Shows the configuration and
connection status of the touchpanel:
•
Unlit during normal operation (the touchpanel is configured and connected to an
IP Link Pro control processor).
•
Blinks if the touchpanel has been configured but is not connected to an IP Link Pro
control processor.
•
Lights steadily if the touchpanel has not been configured.
The indicator can be enabled and disabled, using the
Light sensor
— Monitors ambient light level and adjusts screen brightness, based on the
settings configured using the
Front status light
— The TLP Pro 525M, 725M, and 1025M two LEDs (one on each side).
The TLP Pro 525T, 725T, and 1025T have a single LED (in the center of the bottom edge).
The lights can blink or remain lit steadily and they can light red or green. The lights can be
configured (using Global Configurator) or programmed (using Global Scripter) to provide
feedback information about the system using these variables. Different combinations, for
example a red LED lit steadily or a green LED that is blinking, can provide indications about
the system.
For information about setting up these LEDs, see the
Global Configurator Help File
or the
Global Scripter Help File
.
TLP Pro 525, 725, and 1025 Series Touchpanels • Panel Features
7
