background image

Introduction

This guide describes the function, installation, and operation of the following Extron Touchlink Pro 
Touchpanels:

• 

TLP Pro 525M, TLP Pro 525M NC, TLP Pro 725M, TLP Pro 725M NC, TLP Pro 1025M, 
and TLP Pro 1025M NC

 — wall mountable touchpanels.

The TLP Pro 525M NC, 725M NC, and 1025M NC are streamlined versions of the 
TLP Pro 525M, 725M, and 1025M, with a set of features designed to adhere to government 
and military security protocols.
A range of mounting options are available for each model (see 

Mounting

 on page 26).

• 

TLS 525M, TLS 725M, and TLS 1025M

 — versions of the TLP Pro 525M, TLP Pro 725M, 

and TLP Pro 1025M adapted for use with Room Agent scheduling software. Other than 

Mounting

 (see page 26), this guide does not apply to the TLS models. See the 

Room 

Agent Quick Start Guide

 or 

Room Agent Help File

 for more information.

• 

TLP Pro 525T, TLP Pro 525T NC, TLP Pro 725T, TLP Pro 725T NC, TLP Pro 1025T

 

and TLP Pro 1025T NC

 — touchpanels with weighted bases that allow them to stand on 

any suitable flat surface. 
The TLP Pro 525T NC, 725T NC, and 1025T NC are streamlined versions of the 
TLP Pro 525T, 725T, and 1025T, with a set of features designed to adhere to government 
and military security protocols.

Unless otherwise stated:

• 

The term “touchpanel” refers to all models.

• 

“Wall mountable” models refers to the TLP Pro 525M, TLP Pro 525M NC, TLP Pro 725M, 
TLP Pro 725M NC, TLP Pro 1025M, and TLP Pro 1025M NC.

• 

“Tabletop” models refers to the TLP Pro 525T, TLP Pro 525T NC, TLP Pro 725T, 
TLP Pro 725T NC, TLP Pro 1025T, and TLP Pro 1025T NC.

• 

The term “TLP Pro 725T” refers to the TLP Pro 725T and the TLP Pro 725T NC.

This section discusses the following topics:

• 

About the TLP Pro 525, 725 and 1025 Series

• 

Features

• 

Application Diagram

• 

Requirements

About the TLP Pro 525, 725 and 1025 Series

All of the 525 touchpanels have a 5-inch Active Matrix Color LCD touch display and a screen 
resolution of 800x480 (WVGA).
All of the 725 touchpanels have a 7-inch Active Matrix Color LCD touch display and a screen 
resolution of 1024x600 (WSVGA).
All of the 1025 touchpanels have  10.1-inch Active Matrix Color LCD touch display and a screen 
resolution of 1280x800 (WXGA).
These touchpanels are ideal for any AV application requiring small or medium-sized touchpanels 
with flexible mounting options and fully customizable interfaces.
For all TLP Pro models, the screen layout is designed with the Extron GUI Designer software. 
The functions are assigned to the screen objects with the Extron Global Configurator Plus and 
Professional software or Global Scripter. The user can define the graphics and the functions 
associated with those graphics, providing versatility and adaptability to the configuration and 
control of an AV system.

TLP Pro 525, 725, and 1025 Series Touchpanels • Introduction

1

Содержание TouchLink Pro













































Отзывы: