Room Scheduling System • Microsoft Environment Setup
55
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
Figure 58.
Room Information Dialog Box
5.
Note the room e-mail address shown (see figure 58,
1
). This value is the UPN, the
value used as the
only
valid Exchange User ID for this room in the Room Scheduling
System.
6.
Click
Close
to exit the display (
2
).
7.
Repeat steps 2 through 6 for each desired room.
TIP:
Write down the UPNs of all rooms for setting up the Room Scheduling
System.
Set up the Room Scheduling System in the Microsoft Environment
Perform the following operations to set up the Room Scheduling System:
�
Start the Room Agent software as an administrator (see
on
page 15).
�
Discover any panels that are on the same subnet as the computer running Room Agent
software (see
�
Manually add any panels from a different subnet than the computer that is running
Room Agent software (see
beginning on page 16).
�
Perform the following for
each
panel in the system:
�
�
Verify or change settings (internet variables and password) on the
Communication
Settings
tab (see
on page 19).
NOTE:
If you change any settings but the
Hostname
, the panel disconnects
and you must rediscover or manually find it again. A better approach is to
set these values ahead of time using the on-screen menus of the panel (visit
www.extron.com
and see the applicable panel user guides).
Содержание TLP Pro 520M
Страница 6: ...Room Scheduling System Contents vi ...
