Extron electronics SMP 111, Руководство пользователя

Страница: 60 / 124

SMP 111 • Web-Based User Interface 52
5. To save recordings to two locations at once ( Secondary Recording Destination ):
a. Select (check) the Enable Secondary Recording checkbox (see figure 44 ,
3
on the previous page).
•
The selection in the Recording Destination field (
4
) changes to
Internal Drive . This cannot be changed while secondary recording mode
is enabled. The recording is always stored to the internal drive.
•
The Secondary Recording Destination drop-down list (
5
) is enabled.
b. Select an option ( Auto , Front USB , Rear USB , or RCP USB ) from the Secondary
Recording Destination drop-down list. This designates which connected
storage drive is used to store a second copy of the recording.
•
If Auto is selected, the USB port with higher current limit drop-
down list becomes active. A USB port must be designated to receive a 1.5 A
maximum current from the unit. The other USB ports receive a lower current.
NOTE: If the recording destination limiter is enabled you cannot change any
destination settings or enable or disable secondary storage mode until the record
destination limiter is disabled and that change is saved.
Click the
Record Destination Limiter checkbox to select or deselect the
setting. The Save button within the Recording Media Selection panel must
be clicked to enable selection.
6. Recording files can be limited (portions of long recordings) to a specific size. If this
feature is enabled (default), each time a recording file reaches the specified size, the
file is saved and the SMP creates a new file (of up to the specified size) for the next
portion of the recording, and so on until the recording event ends or the SMP runs out
of storage space.
1 2
Figure 45. Limit Recording Size
To set a recording file size limit:
a. Select (check) the Limit Recording Size checkbox (see figure 45,
1
).
b. Enter a number into the Max file size limit (MB) field or use the Up and
Down arrows (
2
) next to the field to select a number. The file size can be limited to
any size between 100 MB to 3.8 GB (3800 MB).
•
The default is 3584 MB.
•
If the Limit Recording Size checkbox is deselected, the size limit function
is disabled, and the entire recording is stored in a single file.
figure 45