SMP 111 • Web-Based User Interface
39
Disable the "No Source" OSD
1.
Select the
Display
"
No
Source
"
OSD
to
indicate
no
video
input
checkbox to
remove the check mark and disable this OSD.
By default, the SMP 111 will display a
"No
Source"
OSD when there is not an active
video input.
Figure 29.
"No Source" OSD Selection
NOTE:
See
Input/Output
Settings
in the
SMP 111 Embedded Web Pages Help
File
for more control options.
EDID
The
EDID
page within the
Configuration
tab makes it possible to manage the EDID
information (resolution and refresh rate) between the HDMI input and the output source. The
SMP uses EDID Minder, which ensures that a source device connected to the SMP 111
input continuously sees the EDID of a sink device.
This page allows the user to select from 38 factory-loaded EDIDs or create up to three
custom EDIDs (see
on page 84 for a complete list of available
EDIDs).
The default EDID for the SMP 111 is
720p @ 60 Hz
.
To open this page, click the
Configuration
tab at the top of the SMP 111 embedded
web pages and then click the
EDID
tab on the second tier of tabs.
Figure 30.
Configuration Tab, EDID Subtab
figure 29
figure 30
Содержание SMP 111
Страница 1: ...User Guide SMP 111 Streaming AV Product Streaming Media Processor 68 2850 01 Rev C 11 17...
Страница 6: ......
