Extron electronics SMP 111, Руководство пользователя

Страница: 56 / 124

SMP 111 • Web-Based User Interface 48
Alarms and Traps
In the
Alarms and Traps
page within
Configuration
there are two panels:
Alarm
Notifier Destinations
and
Alarm Message List
. An administrator can configure
e-mail account and communication settings to allow the unit to send notification e-mails
in
Alarm Notifier Destinations
. Select whether to log, display a message about,
or send an e-mail about various conditions and errors experienced by the SMP 111 in the
Alarm Message List
panel.
To open this page, click the Configuration tab (see figure 40) at the top of the SMP 111
embedded web pages and then click the Alarms and Traps tab on the second tier of
tabs.
EDID
Figure 40. Configuration Tab, Alarms and Traps Subtab
The Alarms and Traps page opens, showing the two panels (see figure 41):
1
2
Figure 41. Alarms and Traps Page
1
Alarm Notifier Destinations — Enter e-mail sender and receiver information for
alarm notification.
2
Alarm Message List — Choose the level of urgency for a given alarm on the
SMP 111, or disable the alarm. The options to choose for an alarm are:
•
Notify — The SMP sends an e-mail and unsolicited SIS response.
•
Display — The indicate alarm LED is active on the front panel, AAP or wallplate,
and web page. The event is also logged.
•
Log — The SMP records the alarm in the events log only.
•
Disabled - The alarm is disabled.
The Alarm table on the next page lists alarms generated by the SMP 111, what they mean,
and how they are cleared.
NOTE: All active alarms can be manually cleared by an administrator via the web page.
figure 40
figure 41