Extron electronics Quantum Ultra Series, Руководство пользователя

Страница: 97 / 125

Quantum Ultra Series Videowall Processing Systems • Remote Configuration and Control 89
Adding expansion devices manually
If the desired expansion device does not appear on the
NewProject
discovery screen,
add the expansion system manually as follows:
1. On the
NewProject
connection screen, click the Manually Add Device button (see
figure 73 ,
3
on page 85.
2.
On the
Manually Add Device
window, click the Manually Configure Expansion
button (see figure 82,
1
). Ignore the other fields.
Figure 82. Manually Add Device Window
3. On the
Manually Configure Expansion
screen, enter the IP addresses of the
devices in the expansion. Be sure to enter the addresses in the order the devices
are connected in the chain, with the primary device address in the top (first) field (see
figure 83,
1
).
Figure 83. Manually Configure Expansion Screen
4.
Click Confirm (
2
). The system restarts, then after approximately 2 minutes displays
the expansion system as a single item on the device list with the model name
Quantum Ultra Expansion
(see
figure 80
,
1
on page 87).
5. Go to step 4 of the “Starting the VCS Program with Expansion Cards” procedure on
the previous page, and complete the procedure as described.
NOTE:
If the Quantum Ultra Expansion line does not appear on the connection
screen, add the primary device manually (see If you do not see your device in
the Select Device(s) to Add panel on page 85).
82
83