Extron electronics Quantum Ultra Series, Руководство пользователя

Страница: 93 / 125

Quantum Ultra Series Videowall Processing Systems • Remote Configuration and Control 85
6. On the Connection screen, locate your device on the list and click the Add to
System button at the left of the device name (see figure 73,
1
). Connection
information is displayed in the System Devices panel (
2
).
Figure 73. Adding Devices to the System
If you do not see your device in the
Select Device(s) to Add
panel:
a. Click Manually Add Device (see figure 73,
3
). The Manually Add Device
window opens.
Figure 74.
Manually Add Device Window
b. In the IP Address field, enter the address of the Quantum Ultra Series device to
be connected (see figure 74,
1
).
c. If necessary, select the Quantum Ultra Series device type from the Device Type
drop-down menu (
2
).
d. Click Add . The connection information for the device is displayed in the System
Devices panel (see figure 73,
2
).
NOTE: A unit added this way is not shown in the
Select Devices to Add
panel.
7. Edit IP address settings for your device as needed.
a.
In the
Select Device(s) to Add
panel, click the Edit button (see figure 75,
1
).
Figure 75. Editing a Device IP Address
b. The
Communication Settings
dialog box opens. In this window, enter a new IP
address and edit other IP settings as desired.
To enable Dynamic Host Configuration Protocol (DHCP), select the
DHCP
checkbox (see figure 76 ,
1
on the next page). When this box is selected, an
available IP address is assigned automatically to the unit when it is connected to
a supporting network. All other IP settings fields become read-only.
73
74
75