NAV E 401 D and NAV E 201 D Encoders • HTML Operation
56
on page 55) — Click in these fields and type in
valid IP addresses for your encoder.
NOTES:
•
Multicast Discovery IP
is the IP address that the encoder uses to discover
and communicate with all other NAV devices on the network.
•
Multicast Video IP
is the IP address that outputs the video stream.
•
Multicast Audio IP
is the IP address that outputs the audio stream.
— This setting affects the audio and video streams only and
accepts valid differentiated services code point (DSCP) type of service (TOS) decimal
values to adjust the priority of the packets. Click the and buttons or type a number
into the field (within the range
0
to
225
) to overwrite the factory default.
NOTE:
The lower the number, the lower the priority of the packet within a queue.
This may result in packet loss, latency, and jitter in a saturated link.
— Click the and buttons or type a number into the field (within the
range
1
to
225
) to overwrite the factory default.
NOTE:
Understanding how many network hops your farthest endpoint is can help
assure that the packet reaches the desired destination. If too small of a value is
entered, the network could discard the packet before it reaches the destination. In
this case, the endpoint does not receive the streams.
SAVE
to take changes or
CANCEL
to abandon
them. Clicking either button closes the editable pane.
Содержание NAV E 201 D
Страница 6: ......
Страница 8: ...NAV E 401 D and NAV E 201 D Encoders Contents viii...
