NAV E 401 D and NAV E 201 D Encoders • Basic Operation
20
Performing mode 4 and 5 resets
Perform resets of the unit as follows (see figure 11):
1.
Use a small screwdriver to press and
hold
the front panel
RESET
button until the rear
panel
RESET
LED blinks either:
•
Twice, for an IP settings reset
•
Three times for an absolute (factory) reset
Release, then
immediately
press and release again.
RESET
RESET
RESET
RESET
RESET
RESET
RESET
Release, then
immediately
press and release again.
6 seconds
9 seconds
Press and
hold
the
Reset
button.
Press and
hold
the
Reset
button.
Reset LED blinks
three times.
Reset LED blinks
twice.
IP Settings
Reset
Factory
Reset
(Mode 4)
(Mode 5)
Figure 11.
Resets
2.
Release the
RESET
button and then immediately press and release the
RESET
button
again. Nothing happens if you do not momentarily
RESET
within 1 second.
Содержание NAV E 201 D
Страница 6: ......
Страница 8: ...NAV E 401 D and NAV E 201 D Encoders Contents viii...