Extron electronics NAV E 201 D, Руководство пользователя

Страница: 49 / 79

NAV E 401 D and NAV E 201 D Encoders • HTML Operation 41
2. Select (click) a reset level (see figure 35 ,
2
on page 40) or Reboot (
3
).
NOTES :
• Reset Device Settings (Retains TCP/IP Settings and Password)
—
Resets configuration settings. All communication settings and the password
are retained (see the
table
of communication and configuration settings on
page 38).
• Reset All Settings and Delete Files (Retains TCP/IP Settings) —
Resets configuration settings except the communication settings, which are
maintained. Resets the password to the default, which is
extron
(see the table
of communication and configuration settings).
• Reset All Settings and Delete Files — This reset is identical to the Mode 5
reset (see the table of reset modes on page 19), which resets all settings to
factory defaults.
3. Click APPLY (
3
).
The encoder reports that it is
RESETTING
or
REBOOTING
and
displays a status bar that shows the progress of the
operation. Any of these operations concludes, with the
encoder rebooting.
NOTE: You must reconnect to the encoder (see
Opening the Embedded HTML Pages on page 21)
if you have other operations to perform.