NAV E 401 D and NAV E 201 D Encoders • Basic Operation
18
Operation
After the encoder, all decoders, and their connected devices are fully booted up and
operational (the Power LED on each unit is lit steadily) and the devices are paired, the
system is fully operational. If any problems are encountered, ensure all cables are routed
and connected properly.
System operation with a NAVigator
Your NAV system must include an Extron NAVigator, a system manager that configures and
controls the AV streaming system. The NAVigator allows you to make changes to multiple
endpoints in the system from a central location, simplifying operations such as making ties
or bulk configuration.
The base version of the NAVigator can support up to 16 endpoints by default, but if a
LinkLicense is installed, support can be expanded to up to 240 endpoints, depending on
the LinkLicense.
See the
NAVigator User Guide
for details.
Configuration and other operations
Configuration and more complex operation of the system is accomplished via embedded
web pages (see
, beginning on page 21) or Extron Toolbelt. Simple
Instruction Set (SIS) commands (see
, starting on page 62) cannot be
issued directly to the encoder, but are issued via an Extron control system on the AV
network using a process known as “encapsulation” (see the
NAVigator User Guide
, available
for details).
Reset operations
•
The front panel
RESET
button (behind the faceplate) initiates three levels of resets
(numbered 1, 4, and 5 for comparison with an Extron IPL product). The
RESET
button is
recessed, so use a pointed stylus, ballpoint pen, or small screwdriver to access it.
See the
on page 19 for a summary of the modes.
ATTENTION:
•
Review the reset modes carefully. Using the wrong reset mode may result in
unintended loss of flash memory programming, port reassignment, or an encoder
preboot.
•
Étudier de près les différents modes de réinitialisation. Appliquer le mauvais mode
de réinitialisation peut causer une perte inattendue de la programmation de la
mémoire flash, une reconfiguration des ports ou une réinitialisation du contrôleur.
NOTES
:
•
are separate functions, not a continuation from
mode 1 to mode 5.
•
The modes listed close all open IP and other connections and close all sockets.
Содержание NAV E 201 D
Страница 6: ......
Страница 8: ...NAV E 401 D and NAV E 201 D Encoders Contents viii...
