Initial Setup and Verification
•
•
•
•
•
•
•
•
•
•
•
•
Initial setup and configuration checklist
Use the procedures in the following table to initially configure and setup the device, verify correct operation, and back up the
configuration.
TABLE 11
Initial setup and configuration checklist
Task
Task details or additional information
Attach a management station, establish a serial
connection, and change the default passwords
(optional).
Refer to
Establishing a serial connection
on page 57. After completing this task, log in to the
serial port to configure the device.
Set the IP address, subnet mask, and the default
gateway IP address.
Use the
chassis virtual-ip
or
chassis virtual-ipv6
commands to configure an IP address. For
more information, refer to
Configuring a static IP address
on page 59.
Establish an Ethernet connection.
By establishing an Ethernet connection, you can complete the device configuration using a serial
or Telnet session. Refer to
Establishing an Ethernet connection
on page 59 for more
information.
Customize the chassis and host names.
Use the
switch-attributes
chassis-name
and
switch-attributes
host-name
commands to
change the default host name. For more information, refer to
Customizing the chassis and host
on page 60.
Set the date and time.
•
Use the
clock set
command to set the date and time.
•
Use the
clock timezone
command to set the time zone.
•
After you configure the system time, use commands in NTP configuration mode to
synchronize the time with an external NTP server.
Refer to
on page 62 for more information. For detailed command
information, refer to
Extreme SLX-OS Management Configuration Guide
for the SLX
9030/9030-T device.
Optional: Configure the DNS service.
Use the
ip dns domain-name
and, if required, the
ip dns name-server
command to create DNS
server entries. Refer to
on page 61 for more information. For
detailed command information refer to
Extreme SLX-OS Management Configuration Guide
for
the SLX 9030/9030-T device.
Verify that the device operates correctly.
•
Check the LEDs to verify operation of module components in the device. Refer to
ExtremeSwitching SLX 9030 Technical Specifications
on page 97 under the LEDs
section.
ExtremeSwitching SLX 9030 Hardware Installation Guide
9035691-02 Rev AD
55
Содержание EN-SLX-9030-48S-4C
