Extreme Networks BlackDiamond 8806, Руководство по установке оборудования

Страница: 23 / 200

BlackDiamond 8800 Series Switches Hardware Installation Guide
23
Figure 8 shows the MSM-48c.
Figure 8: MSM-48c
Figure 9 shows the 8900-MSM128 module.
Figure 9: 8900-MSM128
The BlackDiamond 8000 series MSMs have the following features on the front panel:
●
Console port—DB-9 serial port used to connect a terminal and perform local management.
●
Management port—A 10/100 Mbps Ethernet management port used to connect an Ethernet cable
directly from your laptop to the switch to view and locally manage the switch configurations. This
port can also be used to connect the system into a parallel management network for administration.
●
A button—Allows you to select the alternate BootROM image when you power on the module. To
use the alternate BootROM image, you must hold the A button while pressing the R button
simultaneously.
●
D button—Allows you to force a system dump that dumps the debug information into NVRAM.
This information is available on the next reboot. No core file is created.
●
R button—Allows you to reset the MSM without removing the module from the chassis.
●
Compact flash slot
In addition, the MSM-G8X has eight SFP data ports. These data ports operate the same as the ports on
the G24X I/O module. (See
“G24X I/O Module” on page 28 for more information about these ports.)
The eight data ports are integrated into the MSM and managed by a separate I/O processor, which
retains control of the eight Ethernet ports on the MSM during a failover. The backup MSM can take
control of the ports.
Module status LEDs
Compact flash
Console port
MGMT
port
A R
D
ASP_051
Management Switch Module
Module status LEDs
Compact flash
Console port
MGMT
port
A R
D
BD_226