background image

28

ENGLISH

if the power supply Cable is damaged, it must be replaCed by the after-sales serviCe or by a similarly 

qualified person, so as to avoid all risks.

routine maintenanCe performed by qualified teChniCians 

routine maintenance must be performed at least once a year.

Using pellets as solid fuel, the generator requires annual routine maintenance, which must be performed by a 

qualified technician, using 

only original spare parts.

Failure to comply can jeopardise safety of the appliance and make the warranty null and void.

Respecting the frequencies of cleaning reserved for the user described in the use and maintenance manual, the generator is guaranteed 

correct combustion over time, preventing any anomalies and/or malfunctioning that could require more interventions of the technician. 

Requests for routine maintenance are not contemplated in the product warranty.

gaskets: pellet hopper lid, door, ash drawer and burn pot

The gaskets guarantee the tightness of the stove and its consequent good functioning.

They must be controlled periodically. They must be replaced immediately if they are worn or damaged.

These operations must be carried out by a qualified technician.

ConneCtion to the flue

Vacuum and clean the pipe that leads to the flue yearly or any time that it is necessary. If there are horizontal tracts, the residue must be 

removed before it can prevent the passage of the fumes. 

deCommissioning (end of season)

At the end of each season, before turning the stove off, it is advisable to empty the pellet hopper out completely, vacuum any residue of 

pellets and dust.

furthermore, please disconnect the generator from the mains electricity and, for greater safety especially in the presence of children, 

remove the power supply cable

.

Routine maintenance must be performed at least once a year.

to find out whErE your nEarEst sErvicE cEntrE is, contact your dEalEr or go to thE 

wEbsitE: 

www.lanordica-EXtraflamE.com

Содержание LUISELLA





































Отзывы: