Extraflame LUISELLA, Руководство пользователя

Страница: 19 / 36

19 ENGLISH
crno (chrono)
This function allows the stove's ignition and switch-off to be automatically programmed.
The factory setting for CHRONO is off.
The chrono allows the programming of 4 time slots within a day, which can be used every day of the week.
ignition and switch-off times can be set for each time slot, along with the specific days of application for the programmed time slot,
the desired temperature and power setting.
current day and time settings are essential for the correct operation of the chrono.
recommendations
Before using the chrono function, you must set the current day and time, so check that you have followed the points listed in the sub-chapter
“ daTE , daY and TimE ”. To use the chrono function correctly, you must activate it as well as program it. The four time slots can be overlapped
using the time switch on and off settings, This allows you to obtain a combination of times in which you can set different temperatures and
power without influencing the stove work status.
nB: if overlapping time slots are set, the stove will stay on until the latest switch-off time.
prG 1-4 (proGramminG 1-4)
Prg x allows you to set the ignition time (
STrT
) and switch-off time (
STop
), the days (
daY1
= Monday /
daY7
= Sunday) included in the
programmed slot and the temperature (
TEmp
) (lou - 7° - 40° - hot), as well as the power (
poW.
) required. Current day and time settings are
essential for the correct operation of the Chrono.
CONTROLS PROCEDURE
Š Press and hold key 4.
Š
Press key 3 until Crno appears and access with key 4.
Š
Select the slot using keys 2-3 and access it with 4.
Š
Select one of the following options: STrT , STop, daY, TEmp and poW. and access with 4
Š Adjust using keys 4 and 5 and confirm with key 2.
Š
Press key 1 several times to exit the menu.
aBil (enaBle)
Allows the chrono and the different stove time slots to be enabled/disabled.
CONTROLS PROCEDURE
Š
Press and hold key 4.
Š Press key 3 until
Crno
appears and access with key 4.
Š
Press 4 to access ENABLE, 4-5 to select ON and OFF, and 2 to confirm.
Š
Press key 1 several times to exit the menu.
sTaT (sTaTus)
references reserved for the technician