Extraflame GABRIELLA PLUS, Руководство пользователя

Страница: 26 / 40

26 ENGLISH
settInGs
• date-tIme
• lanGuaGe
• deGrees
See chapter: firSt ignition SettingS
DISPLAY
This menu allows you to adjust the brightness of the display. The values range from OFF, 1 to 20. If set to OFF, the display backlighting is set
to maximum brightness and turns off after a 60 second delay.
The backlighting can be turned on again by pressing any key or if the stove is in the alarm condition.
CONTROLS PROCEDURE
Š
Press key 6.
Š
Press key 3 until SETTINGS appears and confirm by pressing key 6.
Š
Keep pressing key 3 until DISPLAY appears and confirm by pressing key 6.
Š
Use keys 4-5 to set the desired intensity.
Š
Press key 6 to confirm and key 1 to scroll back through the menus until the initial page.
STAND BY
The STAND BY function, if enabled, is used when stove switch-off is to be controlled by means of an additional thermostat
CONTROLS PROCEDURE
Š Press key 6.
Š Press key 3 until
SETTINGS
appears and confirm by pressing key 6.
Š
Keep pressing key 3 until STAND BY appears and confirm by pressing key 6.
Š
Use keys 4-5 to enable ( ON ) / disable ( OFF ).
Š
Press key 6 to confirm and key 1 to scroll back through the menus until the initial page.
J
FOR CORRECT OPERATION, THE SET THERMOSTAT MUST BE SET TO LOW-TA.
> SEE THE ADDITIONAL THERMOSTAT INSTALLATION CHAPTER
stand By funCtIon set to on
If the STAND BY function is enabled (ON) and the room temperature exceeds the SET THERMOSTAT + DELTA-T OFF value, then the stove
switches off after a preset factory delay, and
STAND BY
will be displayed on the screen.
When the room temperature is lower than the SET THERMOSTAT - DELTA-T ON and after a possible cooling time, the stove switches back on.
stand By funCtIon set to off (faCtory settInG)
When the
STAND BY
function is not enabled (OFF), if the stove exceeds the set room temperature, it will switch to the minimum power level,
modulating and displaying MODULATION on the screen. When the room temperature is lower than the SET THERMOSTAT the stove will
restart at the set power and WORK will be displayed on the screen.
operatIon WIth addItIonal thermostat (optIonal)
stand By funCtIon set to off (FACTORY SETTING)
When the
STAND BY
function is not activated (OFF), if the stove exceeds the room temperature set on the additional thermostat (open
contact), it switches to the minimum power level and displays MODULATION on the screen. When the room temperature is lower than the
set value on the additional thermostat (closed contact), the stove will resume operation at the set power, and WORK will be displayed on the
screen.
stand By funCtIon set to on
If the STAND BY function is activated (ON), when the room temperature set on the additional thermostat is reached (open contact), the stove
will switch off after a pre-set default delay period, and STAND BY will be displayed on the screen.
When the room temperature is less than the set temperature on the additional thermostat (closed contact), and after a certain cooling time,
the stove ignites again.