Extraflame DELIZIA, Руководство пользователя

Страница: 35 / 44

PRODUCT DISPLAY TABLES
35
Chapter 11
PRODUCT DISPLAY TABLES
SIGNALS
Signals
Reason Solution
Display
WAIT FOR
COOL
A new ignition is attempted when
the stove has just been switched off
(normal switch-off or caused by an
alarm).
When the stove switches off (normal or caused by an alarm) it
is necessary to wait until it cools down completely and then
clean the pot.
The stove can only be re-ignited when these operations have
been performed.
MANUAL
Room thermostat set at maximum
value.
In this mode the stove no longer has a temperature level but
works in manual with 5 powers. To escape this function just
lower the room temperature using button 2.
MINIM-
Room thermostat set at minimum
value.
In this mode the stove only works at 1st power independently
from the power set. To escape this function just raise the room
temperature using button 3.
T ON
An external thermostat has been
connected.
The room thermostat probe is
disconnected.
The room thermostat probe is cut-off .
To exclude any external thermostat just disconnect it.
Other restoration operations must be carried out by an
authorised technician.
ST-BY Stove off waiting for re-ignition.
In this mode the machine can be switched on/off using an
additional thermostat (see “
Mechanical thermostat function in
energy saving mode ”).
To exclude the following function just raise the room
temperature using button 3.
DOFF
Stove off due to “ Day-night
temperature function ” and in Stand-
by to re-ignite.
To exclude the re-ignition of the stove due to the “Day-night
temperature function” just hold button 1 down for 3 seconds,
taking the stove to
OFF ”.
To exclude the function completely, press button 4 and, holding
it down, press 5.
COOL
BLACK OUT
No current on the main power
supply. After the complete switch-off cycle the stove will re-ignite
automatically.
CLEANING Automatic pot cleaning is in progress.
The automatic pot cleaning is performed at pre-established
intervals of continued working.
The automatic cleaning does not start if the stove is in 1st
power.