manualshive.com logo in svg

Extraflame DELIZIA, Руководство пользователя

Поделиться
Скачать
Extraflame DELIZIA Скачать руководство пользователя страница 32

CLEANING

32

Chapter 9 

CLEANING

Maintenance operations guarantee correct functioning of the product through time.
Failure to comply with these operations can jeopardise the safety of the product.

POT CLEANING

1. 

The pot must be cleaned every day.

remove the pot from the relevant compartment and free 

 

™

the holes using the appropriate fi re irons supplied.

remove the ash from the pot using a suction device

 

™

suck the ash deposited in the pot compartment

 

™

USING THE SCRAPERS

2. 

Cleaning of the heat exchangers allows to guarantee constant 
heat output through time. This type of maintenance must be 
performed at least once a day. To do this, just use the relevant 
scrapers positioned in the upper part of the stove, making he 
high/low movement several times.

CLEANING THE ASH COLLECTOR TRAYS

3. 

The ash collection trays must be emptied when necessary by 
removing the ash drawer in the lower part. Remove the drawer 
as follows:

press the small lower door down and turn it outwards

 

™

turn the handle by 90° in a way that the drawer releases 

 

™

from the fi xed body of the stove

extract the drawer and empty the ash

 

™

Carry out the procedure in the reverse order to re-mount the 
drawer.

 

fi gure 9.1

 

fi gure 9.2

 

fi gure 9.3

 

fi gure 9.4

 

fi gure 9.5

Содержание DELIZIA













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды