Extraflame DELIZIA, Руководство пользователя

Страница: 29 / 44

USER PARAMETERS
29
Chapter 8
Press button 1 to escape.
Nota bene: The relative indicator light on the control board will switch on when the weekly programmer is
active (see display table description).
TO DEACTIVATE THE WEEKLY PROGRAMMER enter user programming by pressing key 3 and, holding it
down, press key 5. Shift using button 5 until “ CHRONO ” appears on display D1 and set “ OFF ” in display D2
using keys 2 and 3. Successively press key 1 to confi rm and escape.
The manual controls, from the display or remote control, always remain priority with respect to
programming.
DAY-NIGHT TEMPERATURE FUNCTION
The day-night temperature function allows to switch the appliance on/off automatically on the basis of
two pre-selected temperatures.
The system allows to set one temperature during the day and another one during the night.
First of all the current day and time must be set using the current day and time adjustment sequence to
give a reference to the function itself.
To access the day-night temperature function parameters, press 3, hold it down and press 5 and then
release both keys together: once entered, press button 5 and move to parameter b (D2=
UT B ).
Parameter b (D2UT B; D1=E.g. “06:00”)
Using buttons 2 and 3 it allows to adjust the day time start/night time end.
To confi rm and continue programming, press button 5.
Parameter c (D2=UT C; D1=E.g. “22:00”)
Using buttons 2 and 3 it allows to adjust the day time end/night time start.
To confi rm and continue programming, press button 5.
Parameter d (D2=UT D; D1=E.g. “25°C”)
Using buttons 2 and 3 it allows to adjust the day time maximum temperature.
To confi rm and continue programming, press button 5.
Parameter E (D2=UT E; D1=E.g. “20°C”)
Using buttons 2 and 3 it allows to adjust the night time maximum temperature.
To confi rm and continue programming, press button 1.
Once exiting the programming, to activate/deactivate the function press 4, hold it down and press 5 and
then release both keys together.
The relative luminous indicator will appear/disappear on the control board (see display table
description).
N.B. The parameters must only be set with the stove off !