Extraflame Comfort Mini страница 10 Скачать руководство пользователя

Страница: 10 / 48

Chapter5

ASSEMBLY AND INSTALLATION INSTRUCTIONS

Chapter5

ASSEMBLY AND INSTALLATION INSTRUCTIONS

The installation must comply with:

UNI 10683 (2005) heat generators fed with wood and other solid fuels: installation.

The chimneys must comply with:

UNI 9731 (1990) chimneys: classifi cation according to thermal resistance.

EN 13384-1 (2006) calculation method of the thermal and fl uid-dynamic features of the chimney.

UNI 7129 point 4.3.3 provisions, local rules and prescriptions of the fi re brigade.

UNI 1443 (2005) chimneys: general requirements.

UNI 1457 (2004) chimneys: internal ducts in terracotta and ceramics.

GLOSSARY

CLOSED HEARTH DEVICE

Heat generator that can only be opened to load fuel during use.

BIOMASS

Material of organic origin, excluding the material incorporated in geological formations and fossilised.

BIOFUEL

Fuel produced directly or indirectly from biomass.

FLUE or CHIMNEY

Vertical duct for collecting and expelling combustion products from a single appliance at a suitable height
from the fl oor.

EXHAUST CHANNEL OR PIPE

Duct or connecting element between the heat generating device and the chimney for extracting the
combustion products.

INSULATION

The series of measures taken and materials used to prevent heat transmission through a wall dividing
rooms at diff erent temperatures.

CHIMNEY CAP

Device located at the top of the chimney that facilitates dispersion of the combustion products in the
atmosphere.

CONDENSATE

Liquid products that form when the temperature of the combustion gas is lower than or equal to the dew
point of the water.

HEAT GENERATOR

Device that permits the production of thermal energy (heat) by the rapid transformation of the chemical
energy of the fuel by means of combustion.

AIR LOCK

Mechanism for modifying the dynamic resistance of the combustion gasses.

Содержание Comfort Mini

















































Результаты поиска

Содержание Comfort Mini

Отзывы:

Похожие инструкции для Comfort Mini

Бренды по названию

Популярные бренды

Extraflame Comfort Mini, Руководство пользователя

Результаты поиска

Содержание Comfort Mini

Отзывы:

Похожие инструкции для Comfort Mini

Бренды по названию

Популярные бренды