Extraflame Comfort Mini, Руководство пользователя

Страница: 9 / 48

9
SAFETY DEVICES
Chapter3
SAFETY DEVICES
BREAKDOWN OF HOT AIR DISTRIBUTION FAN
If the blower stops for any reason, the stove automatically shuts down to prevent overheating.
FLUE GAS EXTRACTOR BREAKDOWN
If the extractor stops, the electronic unit immediately prevents pellet loading.
PELLET LOAD MOTOR BREAKDOWN
If the motor stops, the stove continues to operate until the minimum cooling level is reached.
FAILED IGNITION
If no fl ame develops during the ignition phase, the appliance automatically attempts a new ignition, this
time, though, without loading pellets.
If, after this attempt, the stove still has no fl ame, the stove display shows “
NO FLAME” . If you attempt to
light the stove again, the display shows “ CLEANING WAIT ” which means “WAIT”.
This function reminds you that before lighting the stove, you must be sure that the brazier is free of
dirt and debris.
TEMPORARY POWER CUT
The appliance will re-light automatically after a brief power failure. When the power goes off , the stove
may emit a minute quantity of smoke inside the house for a period of 3 to 5 minutes.
THIS DOES NOT POSE ANY SAFETY RISK.
ELECTRICAL SAFETY DEVICE
The stove is protected against violent changes in power by a master fuse on the rear of the stove (2A 250V
delayed).
FLUE GAS EXHAUST SAFETY DEVICE
If the exhaust system fails, an electronic pressure switch stops the stove and an alarm is signalled.
PELLET TEMPERATURE SAFETY DEVICE
In case of overheating inside the pellet tank, this safety device blocks stove operation; resetting is manual
and must be performed by an authorised technician.