Extraflame Comfort Mini, Руководство пользователя

Страница: 17 / 48

17
COMFORT MINI/P80/MINI CRYSTAL INSTALLATION
Chapter5
COMFORT MINI/P80/MINI CRYSTAL INSTALLATION
Adaptation frame
Sliding base
with rails
Primary air
intake pipe
The insert is supplied with a sliding base in iron, which
allows it to be installed in a pre-existing chimney.
The base allows you to slide out the insert easily for
maintenance and cleaning at the end of the year. If
you do not already have a fi replace, you can build one
using the insert support pedestal (optional kit), which is
designed to secure the insert to the fl oor.
Description of the components:
Sliding base
™
Guide rails
™
Exhaust pipe
™
Primary air inlet pipe
™
Power outlet
™
Adapter frame
™
FITTING WITH SLIDING BASE
Take the sliding base and place it in the existing
fi replace.
Using chalk, mark the base fi xing holes on the fl oor of
the fi replace.
Drill the holes for 8 mm steel screw anchors.
Drill a 60 mm hole in correspondence with the air inlet.
The air inlet must be made outside the
fireplace, because it must not draw in
overheated air.
Provide a power outlet on the rear of the insert, so that
the plug can be reached easily once the installation is
complete.
Fix the base using the attachment screws.
Make the connection to the exhaust outlet and air inlet,
following the instructions previously described.
Then tilt the insert so that the wheels fi t into the guide
rails and slide it in until the exhaust auger coupling is
completely inserted in the exhaust conveyor box.
fi gure 5.1
fi gure 5.2
fi gure 5.3