Extraflame Comfort Mini, Руководство пользователя

Страница: 39 / 48

39
TABLE OF DISPLAY MESSAGES
Chapter11 Chapter11
TABLE OF DISPLAY MESSAGES
INDICATIONS
Message
Cause Solution
Display
CLEANING WAIT
An attempt has been made to switch on
a stove again when it has just been shut
down (normal shutdown or caused by an
alarm).
When the stove has just been shut down (normal
shutdown or caused by an alarm situation), you have
to wait until it is completely cold and then clean the
brazier.
It is possible to re-start the stove only after having
carried out this operation.
MAX
Room Thermostat set at max. value.
In this mode, the stove no longer has a temperature
level but works in manual mode with 5 powers. To
exit this mode, press button 2 to lower the room
temperature.
MIN
Room Thermostat set at min. value.
In this mode, the stove only works exclusively at the
1st power level, independently from the set power.
To exit this Mode, press button 3 to increase the
temperature.
T ON
An external thermostat has been
connected.
The room thermostat probe has
disconnected from the board.
The room thermostat probe is
interrupted.
To exclude an external thermostat, simply disconnect
it.
Other resetting operations must be carried out
by an authorised technician.
STBY
Stove is off and waiting to start again.
In this mode, the stove can be switched on/off
by using an external thermostat (see “Mechanical
thermostat with energy saving”)
To exclude this function, increase the room
temperature by pressing button 3.
DOFF
Stove is off because of “ Day/Night
Temperature Function ” and waiting to
start again.
To stop the stove from starting once more, (because
of the “
Day/Night Temperature Function ”) press button
1 for three seconds, turning the stove OFF .
To disable this function completely, hold down button
4 and press button 5 at the same time.
NO RANGE
Lack of communication between remote
control and stove.
Check the power supply of the stove.
Carry out the procedure “Selecting the operating
frequency” described in the manual.
Remote control energy saving: press button 4 or 5 to
restore correct operation.
N.B. Certain radio-frequency devices (e.g. mobile
and cordless phones, etc.) may interrupt the
communication between the remote control and the
stove.
Other resetting operations must be carried out by
an authorised technician
.
COOLING
BLACK OUT
No current on the general power supply.
When the shutdown cycle is completed, the stove will
light again automatically.
BRAZIER CLEANING
The automatic cleaning of the brazier is
in progress.
The automatic cleaning of the brazier takes place at
regular set intervals. The automatic cleaning does not
start if the stove is at the fi rst power level
DOOR OPEN
The fi re door is open Keep the door closed during normal operation.