Extra 300/SC, Руководство по обслуживанию

Страница: 225 / 250

CHAPTER 77
PAGE 16
MAINTENANCE MANUAL EXTRA 300SC
PAGE DATE: 12. February 2019
77-41-06 Probes and Transducers
The CHT probes are screwed to the respective ports on the
engine (see Figure 7).
The EGT probes are attached to the exhaust pipes with
clamps (see Figure 7).
The OT probe is screwed to the respective port on the aft
engine side (see 79-30-20).
The oil (5, Figure 5) and fuel (6) pressure transducers are
screwed to the respective fittings on the firewall.
Refer to Chapter 28 for fuel contents transmitters.
The tubing (8) of the MAP transducer (9) is routed from the
module through a bulkead fitting (7) in the firewall to the
engine (see also Figure 1).
The rpm signals are taken directly from the magnetos.
The OAT probe is fastened to the right side of the bottom
fuselage cover (behind the center tank drain) by means of a
nut. A plug allows easy disconnecting.
Figure 7 EGT/CHT Probes Location