Extra 300/SC, Руководство по обслуживанию

Страница: 185 / 250

MAINTNANCE MANUAL EXTRA 300/SC
PAGE DATE: 12. February 2019 CHAPTER 53
PAGE 14
Position markings
Position markings
Figure 10 Canopy position markings
6 Secure the canopy glass in the frame. Draw a positioning
line (see Figure 9) and position markings on the inside (see
Figure 10).
7 Prepare canopy glass for bonding.
8 Remove a strip (width approx. 50mm) from the protective
layer from the outside along the canopy glass bonding area.
9 Place fine tape (width 3mm) on the outside opposing the
positioning line on the inside.
10 For protection purposes, place 3 layers of tape as depicted
in Figure 11.
11 Sand down the canopy glass up to the fine tape line (use
Scotch Brite Handpad Medium). Check that there are no
reflecting areas left.
50 mm Tape
2 x 20 mm Tape
Fine Tape
Bonding Area
Canopy Glass
Inside Line
Figure 11 Canopy tape markings