Exsurco Medical Amalgatome SD, Руководство пользователя

Страница: 35 / 62

A
MALGATOME
®
SD U
SER
G
UIDE
PN#: X101456, Rev. C Page 31 of 56
Sterilization Preparation
1. Place the clean components into their proper locations
in the previously cleaned sterilization tray.
NOTE: There are visual guides, including part
number and description, marking the correct location
for the placement of each component.
Figure 1
Figure 2
2. Place each component into the sterilization tray.
•
Do not bend or damage any of the components.
•
Ensure that the pneumatic hose is coiled carefully
around the outside, taking care as to not crimp it
into the compartment.
•
Place the hand piece into the sterilization tray.
•
Ensure that the lock nut and lock knob have been
previously assembled to the hand piece.
•
Use the lock nut wrench to properly tighten the
knob and nut into place if necessary.
•
Do not disassemble the depth gauge.
•
Do not disassemble any screws, washers, the
pinion, or the lever from the hand piece.
•
Do not remove the end connectors from the
pneumatic hose.
3.
Double wrap the sterilization tray with all components inside using United States (US) Food & Drug
Administration (FDA)-cleared Center for Scientific Review (CSR)-type wrap per methods listed in current
version of
ANSI/AAMI ST79, A1, A2, A3, A4 and adhere with chemical indicator autoclave tape.