Exsurco Medical Amalgatome SD, Руководство пользователя

Страница: 34 / 62

A
MALGATOME
®
SD U
SER
G
UIDE
PN#: X101456, Rev. C Page 30 of 56
Table 1 (Automated Cleaning Instructions for Use- Reusable System)
Cycle
Time (minutes:
seconds)
Minimum Temperature Type of Detergent/ Water
Prewash 2:00 Cold Tap
Wash 4:00
Heated Tap
(60°C)
Enzymatic Cleaner
(per the manufacturer’s
instructions)
Neutralize 2:00 Hot Tap
Neutral Detergent
(per the manufacturer’s
instructions)
Rinse 0:15 Hot or Heated Tap
Thermal Rinse 5:00
Heated
(90°C)
Heated Deionized or High
Purity Water
Dry 15:00 High (98.8°C) NA
Upon completion of the automated cycle, inspect as outlined below:
9. In a well-lit area, visually inspect each component in order to ensure all surfaces are clean and dry.
10. Using the lock nut wrench, replace the locking knob and locking nut back onto the hand piece.
Visual Inspection
After cleaning and during and after reassembly, visually inspect all system components for visual contaminants. If
any contaminants are present, re-clean following the appropriate cleaning instructions. Perform a component
count in order to ensure that all components are present and none have been lost during the cleaning process.
Check for any corrosion on the laser etching of the components. If present, contact Exsurco Medical Customer
Service for a Service Repair Order at 1-800-243-6049, ext. 4, or email support@exsurco.com.