Exsurco Medical Amalgatome SD, Руководство пользователя

Страница: 19 / 62

A
MALGATOME
®
SD U
SER
G
UIDE
PN#: X101456, Rev. C Page 15 of 56
System Check
This section describes the process for checking the system and setting the depth gauge.
NOTE : This process must be performed over a sterile surface.
Figure 1
1. Slide the ON/OFF lever on the hand piece to the
ON position.
Figure 2
2. Press down on the ON/OFF lever to activate the
system. It is now ON.
When the system activates, the disposable
excision ring blade spins.
3. Verify that all connections are secure and that
the air pressure is set correctly while the system
is running.
NOTE: The required air pressure setting is 100
psi.
Figure 4
4. Release the ON/OFF lever, and then slide it to
the OFF position.
The system deactivates and the disposable
excision ring blade stops spinning. The system is
now ready to be used for the procedure.
CAUTION: Always pass the hand piece from one person to another with the ON/OFF lever in the OFF position.
Do not grab or pass the hand piece by the cutting head due to the risk of contact with the excision ring blade.