Exsurco Medical Amalgatome SD, Руководство пользователя

Страница: 28 / 62

A
MALGATOME
®
SD U
SER
G
UIDE
PN#: X101456, Rev. C Page 24 of 56
Manual Cleaning of the Sterilization Tray
1. Prepare a neutral pH or instrument-safe enzymatic cleaning solution according to the cleaning solution
manufacturer specifications.
Figure 1
2. Disassemble the tray into its individual
components:
•
Base
•
Lid
•
Internal instrument tray
NOTE: For additional part number
information, refer to Appendix B: Parts
Information.
3. Rinse each component under running tap water for a minimum of one minute in order to remove excess soil.
4. Immerse the base, internal instrument tray, and lid into the cleaning solution and let soak for a minimum of
five minutes. Do not immerse the unit overnight.
5. While still immersed in the cleaning solution, use a non-metal, soft-bristled brush moistened with cleaning
solution to scrub each component for a minimum of two minutes each and until visibly clean.
6. Place each component in a tap water bath for a minimum of one minute, and then repeat one time using fresh
tap water. Do not immerse the unit overnight.
7. Place each component in a critical water (e.g., deionized (DI), reverse osmosis (RO), or distilled water) bath
for a minimum of one minute. Do not immerse the unit overnight.
8. Using a sterile, lint-free wipe, dry each component. Use multiple wipes as necessary.
9. In a well-lit area, visually inspect each component in order to ensure all surfaces are clean and dry.
Automated Cleaning of the Sterilization Tray
1. Prepare a neutral pH or instrument-safe enzymatic cleaning solution according to the cleaning solution
manufacturer specifications.
2. Disassemble the tray into its individual components:
a. Base
b. Lid
c. Internal instrument tray
NOTE: For additional part number information, refer to Appendix B: Parts Information.
3. Rinse each component under running tap water for a minimum of one minute in order to remove excess soil.
4. Immerse the base, internal instrument tray, and lid into the cleaning solution and let soak for a minimum of
two minutes. Do not immerse the unit overnight.
5. While still immersed in the cleaning solution, use a non-metal, soft-bristled brush moistened with cleaning
solution to scrub each component for a minimum of one minutes each and until visibly clean.