Exsurco Medical Amalgatome SD, Руководство пользователя

Страница: 15 / 62

A
MALGATOME
®
SD U
SER
G
UIDE
PN#: X101456, Rev. C Page 11 of 56
Setup Instructions
This section describes how to inspect and set up the Amalgatome SD System prior to each use.
Perform the following procedures before each use. Follow sterile field aseptic technique per the Association of
periOperative Registered Nurses (AORN) guidelines and hospital protocol. Open, inspect, and set up the sterile
Amalgatome SD and disposable excision ring blades within the sterile field.
Inspection
1. Inspect the disposable excision ring blade for possible damage, wear, or defects. Ensure that the excision ring
blade is free of particulate and burrs. Discard the excision ring blade if it is damaged or defective.
2. Inspect all movable parts in order to ensure that the parts function through the intended range of motion.
Do not use or reprocess damaged or defective parts. If the system does not function correctly, contact Exsurco
Medical Customer Service at 1-800-243-6049, ext. 4, or email support@exsurco.com for repair or
replacement.
3. Inspect the O-ring on the hand piece of the device. Wear on the O-ring is expected. During the annual
preventative maintenance program the O-ring will be replaced. Do not use if the O-ring is cut or severed in
half, or missing. Do not attempt to replace the O-ring.
Setup
Refer to Appendix D: Quick Reference Guide for a pictorial reference to this procedure.
1. Assemble the cutting head onto the hand piece.
Figure 1a
a. Hold the hand piece in the upright position, with the
protruding gear facing upward and the
ON/OFF lever
facing the user.
Figure 1b
b. Align key slot on the handle onto the pin on the head of
the system.