Exsurco Medical Amalgatome SD, Руководство пользователя

Страница: 17 / 62

A
MALGATOME
®
SD U
SER
G
UIDE
PN#: X101456, Rev. C Page 13 of 56
Figure 2e
e. While standing close to the table or sterile surface, use
the thumb notches on the tray to release the excision
ring blade out of the clamshell onto the sterile surface.
CAUTION: At this time the excision ring blade is
lying teeth side down on the sterile surface. Do not
touch the inner ring of the excision ring blade. It is the
sharp cutting surface.
Figure 2f
f. Hold the outer edge of the excision ring blade by
grasping the blue strip and load the excision ring blade
into the hand piece. While nesting the excision ring
blade, turn its outer edge slightly in order to ensure
proper seating.
Figure 2g
g. Place the excision ring blade lock ring over the excision
ring blade and twist it in a clockwise motion until it
stops. Do not over tighten.
3. Attach the pneumatic hose.
Figure 3a
Figure 3b
a. Connect the female end of the pneumatic
hose to the male end of the hand piece,
securing with the twist-lock feature.
b. Lubricate the O-ring prior to connecting the
air hose with sterile mineral oil. This will
help make the female end of the air hose
easier to attach to the male end of the hand
piece using the toggle barbs. Do not bend
hose at a 90o angle at the connection site.
Do not use excessive force during the
process.
Figure 3c
c. Grasp the hose and attach the hose to the
swivel connector on the hand piece. Turn the
hose clockwise to secure.
NOTE: If the connection seems difficult to
attach it is acceptable to place a few drops of