89
SunSDR2 PRO User Manual
© 2018 Expert Electronics
TRANSCEIVER OPERATIONS
How antenna switch works with the RX ONLY function:
For example: on the 80M band selected the A2 antenna output, and on the 40М band selected
the A3 antenna output, if you switch from the 40М band to the 80М band, you'll be able to
assign the RX ONLY on the A3 antenna output and lock it only for RX. Now if you switch one
of the software receivers on the 40М band, the transceiver's antenna switch will detect that the
A3 output is locked for RX and won't change it (leave it in a state before switching to the 40M
band).
To assign the RX ONLY on an antenna input it's required to have at least one free antenna
input, e.g. all software receivers should have another antenna output for TX.
"Save per band" function in the Antenna switch can be turned off in the drop-down menu.
When it's disabled, transmitter output will switch for both software RXs on all bands.
7.5
Voice Recorder Operation
Voice recorder records the signal in the RX filter and the signal of your own microphone in the
TX mode.
Record of t he receive voice signal:
1. Press the Rec button
to start recording.
2. Press again the Rec button
to stop recording.
Note:
·
Recording of the received signal is available in all mode types.
Record of t he microphone signal:
1. Press the РТТ button on the microphone or the MOX button in the software.
Transceiver will turn to the TX mode.
2. Press the Rec button
to start recording and begin to speak in the microphone.
3. Press again the Rec button
to stop the recording.
Play t he recorded signal wit hout t ransmit t ing it on t he air:
1. Press the Play button
with the the right mouse button to play the recorded voice signal
in phones or internal speaker. In the meantime the receiver will be silent.
2. When the playback ends you'll hear the air again.
Play t he recorded signal wit h t ransmit t ing it on t he air:
Содержание SunSDR2 Pro
Страница 2: ......
