40
SunSDR2 PRO User Manual
© 2018 Expert Electronics
ExpertSDR2 SOFTWARE DESCRIPTION
5.2.2
Frequency and S-meter indicators
Mainly, this panel consists of the visual indicators, like the VFO A/B frequencies, the signal level
on the antenna's input (S-meter) and several control buttons.
Displaying elements:
- VFO B frequency indicator (sub-receiver).
Note:
·
You won’t hear the audio from the VFO B if it is out of the panorama bandwidth.
Sub-receiver control unit:
- SubRX – enable sub-receiver. If you want to listen to the VFO A
and VFO B frequencies simultaneously, use the Sub-receiver.
1. Activate the Sub-receiver by pressing the SubRX button.
2. Set the required VFO B frequency.
3. Listen to the VFO A and VFO B frequencies simultaneously.
Note:
·
VFO A receiver's red tuning line means that in Sub-RX mode you'll transmit on the VFO A
frequency.
·
To turn the Sub-receiver to transmit, press the
red
TX button/indicator
.
·
You can switch the point and click control on the panorama between VFO A and VFO B
receivers, by pressing the middle mouse button. You’ll control the RX with the same color to
the mouse cursor.
·
When you change the band the
SubRX is disabled.
B>A – assign the VFO B frequency to VFO A
A>B – assign the VFO A frequency to VFO B
B<>A – swap frequencies between the VFO A and VFO B
- Antenna switch indicator. It displays which antenna input is used for RX and TX.
Содержание SunSDR2 Pro
Страница 2: ......
