38
SunSDR2 PRO User Manual
© 2018 Expert Electronics
ExpertSDR2 SOFTWARE DESCRIPTION
By default, 15% - common value for this mode.
5. Press the CTCSS button to activate CTCSS mode.
6. Receive signals with the CTCSS tone.
6.а. Press the РТТ button on the Mic to transmit the signals with the CTCSS tone.
7. Release the РТТ button on the Mic to turn to RX mode.
- button switches the shift of the transmission frequency, to operate through a
repeater. This function is usually used on the 10M, 6M, 2M and 70cm bands.
- in the drop-down window, you can adjust the Shif t frequency.
Enable the shift of the TX frequency to work through a repeater. The sub-receiver displays the
TX frequency and the main receiver displays the RX frequency.
When you enable the WFM mode, one additional button appears:
- when enabled, this function allows the software to automatically detect whether the
station is strong or not and lets you listen to it in st ereo mode.
- Play/Record buttons. More details in the
Voice Recorder operation
.
- AG C sensitivity control slider (Automatic Gain Control on classic
transceiver). The adjusted level is saved per band.
- slider for the transceiver's output power adjustment.
- slider for the transceiver’s output power adjustment while
transmitting the tone (carrier) signal.
- slider for the microphone gain level. In CW mode, it switches to
the Speed button and duplicates the BreakI n functionality.
- In the drop-down menu, you can select Mic1, Mic2 - transceiver's
microphones, Mic PC - PC's microphone. For fine tuning of the PC microphone open: Opt ions
> Mic tab (more details in the
Mic tab
). Also in this menu, you can Enable Mic AG C.
Note:
·
Remember, if you disable the MIC AGC, it may distort your signal and cause interference to
neighboring stations.
89
49
Содержание SunSDR2 Pro
Страница 2: ......
