EXFO T200S Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 146

EXFO T200S Скачать руководство пользователя страница 71

Troubleshooting

Tunable Laser Source

65

Viewing System Information

Viewing System Information

You can see information about your product, such as the serial number, options, version
numbers, license agreement and contact information at all times.

To view product information:

1.

In the task bar, touch the

button.

2.

Do one of the following:

³

To display contact information, touch the

Technical support

tab

³

To display product information, touch the

System information

tab

3.

To see the license agreements, touch the

View license agreement

button.

4.

Touch the

button to exit the

Settings

window.

Displaying the User Documentation

The user guide is available in PDF format on the USB key delivered with the instrument and
from the EXFO website: www.EXFO.com/en/resources/

Contacting the Technical Support Group

To obtain after-sales service or technical support for this product, contact EXFO at one of
the following numbers. The Technical Support Group is available to take your calls from
Monday to Friday, 8:00 a.m. to 7:00 p.m. (Eastern Time in North America).

For detailed information about technical support, and for a list of other worldwide locations,
visit the EXFO Web site at www.exfo.com.

If you have comments or suggestions about this user documentation, you can send them to
[email protected].

To accelerate the process, please have information such as the name and the serial number
(see the product identification label), as well as a description of your problem, close at
hand.

Technical Support Group

400 Godin Avenue
Quebec (Quebec) G1M 2K2
CANADA

1 866 683-0155 (USA and Canada)
Tel.: 1 418 683-5498
Fax: 1 418 683-9224
[email protected]

«
...
69
70
71
72
73
...
»

Содержание T200S



















































































































































Отзывы:

Нет отзывов