EXFO T200S, Руководство пользователя, Страница: 50 / 146

Remotely Controlling the T200S
44
T200S
Entering/Exiting the Remote Mode
To remotely control the T200S through your company network:
1.
In the T200S task bar, touch the button to display the Settings window and select
the
Ethernet
tab.
The TCP socket area enables you to configure the Ethernet connection of the T200S.
2. Connect an RJ45 cable from your company network to the T200S Ethernet port.
3. In the Settings window, set the IP address, subnet mask and gateway to identify your
T200S (see
Connecting the T200S to your Company Network
on page 21).
4. Touch Apply to validate the connection parameters.
5.
On your computer, use the Ethernet parameters defined in the T200S Settings window
to set the communication with your T200S in your application.
Entering/Exiting the Remote Mode
The T200S enters the remote mode when it receives a command from an external
controller. When the remote mode is activated, you cannot use the T200S GUI to control the
T200S.
In remote mode, the T200S GUI displays the
Local
mode button on the main screen.
To enter the remote mode:
1.
Use an RJ45 cable to connect the external controller to the T200S:
2. Make sure the port is properly configured for remote control: see
Setting the T200S
Ethernet Port on page 43.
3.
Send a command from the remote controller. All available commands are described in
SCPI Command Reference on page 71.
When the T200S receives a command from an external controller, it enters the remote
mode: the GUI is deactivated and the
Local button appears on the main screen.
To exit the remote mode:
To get back to the local control of the T200S, touch the Local button.
The GUI is now available and you can use it.
The GUI will be back to remote mode if another remote command is received by the
T200S.
I
MPORTANT
Make sure that the firewall of your computer allows communication on the 5025
port.