EXFO T200S, Руководство пользователя, Страница: 20 / 146

Getting Started with Your T200S
14
T200S
Connecting the T200S to a Power Source
Connecting the T200S to a Power Source
The T200S has a chassis connected to ground via the power supply cable. A protective
ground connection by way of the grounding conductor in the power cable is essential for
safe operation.
To connect the T200S to a wall socket:
1.
Make sure the power switch is set to O .
2. On the rear panel, connect the power supply cable provided with the instrument to the
mains socket located on the rear panel of the T200S.
3. Plug the other end of the power supply cable to the proper voltage wall socket outlet (to
know the voltage requirement, see
Electrical Safety Information on page 10).
4. On the rear panel, set the power switch to I .
W
ARNING
³
Make sure the wall socket on which the T200S will be plugged is protected by a
16 A max circuit breaker.
³
Make sure the T200S power source does not apply more than 265 Volts RMS
between the supply conductors and the ground.
³
To avoid the possibility of injury, make sure the socket outlet in which the
power supply cable will be plugged is equipped with a protective ground
contact, and that the electrical installation fulfills the local safety requirements.