Excalibur AL-1650-EDPB, Руководство по эксплуатации

Страница: 8 / 20

8
whEn ThE SYSTEm TRiGGERS
If the system were to be compromised while armed, it will trigger sounding the
siren/horn and flashing the parking lights for 30 seconds (programmable). When
disarming the system after a trigger event, the siren/horn will chirp 4 times and the
parking lights will flash 4 times instead of the standard 2 times.
LOCK On TRiGGER: If a door is opened when the system is triggered, it will wait
until the door is closed again, then lock the doors� This patented feature is useful to
further deny a thief of further access to the vehicle�
STORm SAFE mODE: When the system is triggered, pressing the “UnLOCK” button
will stop the alarm from sounding but will leave the doors locked� This function is use-
ful if you have a false triggering situation due to violent weather�
ZOnE ViOLATiOn RECALL: The system is capable of telling you which zones were
triggered last. The system’s status light will flash to indicate which zone was triggered.
This occurs during the alarm cycle AnD after disarming� The system will store the last
triggered zone until the vehicle’s ignition key is turned on� See “The Status Light” sec-
tion of this manual for further explanation of this feature�
nUiSAnCE PREVEnTiOn: If the system prewarns 5 times within 15 minutes, it will
bypass the zone for the remainder of the 15 minutes before rearming the pre-warn
zone� Additionally, if a full trigger zone is left open, the system will trigger a total of 3
times before bypassing the zone� Once the zone is closed again, it will re-arm that
zone�
PRE-wARn DETECTiOn
This system’s impact sensor is designed, in addition to detecting a full impact, will
warn away potential violators when it detects a light impact to the vehicle� The system
will respond by chirping the siren/horn 3 times and locking the doors� This is very use-
ful when an intruder attempts to unlock the door with “slim jim” types of devices�
Security System Features (cont’d)
EmERGEnCY OVERRiDE
If you were to lose or break your controller, you’d need to perform an emergency
override to disarm the system and use your vehicle� To do so, use the following steps:
STEP 1 - Enter the vehicle (the alarm should sound)
STEP 2 - Turn the ignition key to the “On” position
STEP 3 - Press the valet switch (located in the window-mount antenna) once
NOTE: Enter your SecureCode at this time if programmed via user feature #1
STEP 4 - Turn the ignition “OFF”�
VALET mODES
ALARm VALET mODE , while active, completely disables all security functions�
Keyless entry and remote start are still operable� To enter valet mode, perform the
following steps:
STEP 1 - Disarm the system either with the controller or by performing an emergency
override (make sure not to hold the brake pedal)�
STEP 2 - Press and hold the valet switch for 2 seconds� The system will chirp once
and the RED status light will turn on�
Using The Valet Switch