Excalibur AL-1650-EDPB, Руководство по эксплуатации

Страница: 11 / 20

11
Anti-Carjacking Protection (cont’d)
tion, it will not respond to the transmitter, nor will the system reset automatically after
60 seconds, and it can only be disengaged by:
Step 1 Turning the vehicle’s ignition off�
Step 2 Turning the ignition back on�
Step 3 Within 5 seconds, perform an Emergency Override using the Valet Switch� If
the SecureCode has been customized, the correct number of Valet Switch presses
must be made�
The different types of Anti-Carjacking protection are:
ignition Activated Anti-Carjacking activates every time the vehicle’s ignition is
turned on� The Valet Switch must be pressed within 60 seconds of activating to can-
cel Anti-Carjacking� This is User Programmable Feature #15�
Door Anti-Carjacking
activates when a door is opened after the vehicle is started
and the engine is running� The Valet Switch must be pressed within 60 seconds after
activation to cancel Anti-Carjacking� This is User Programmable Feature #15�
If the Unauthorized Transmitter Alert feature is on, programming a transmitter to the
system will activate the “UTA” warning and the extended Status Light indication� For
the next 48 hours, the siren/horn will sound a brief series of chirps every time the
vehicle’s ignition key is turned on�
Special Programming procedure to turn on the UTA feature: Using this method
to program transmitters or optional controllers, and to turn on the Unauthorized Trans-
mitter Alert feature�
Follow the same steps as the Standard Programming, but on any transmitter/con-
troller being programmed instead of pressing the “ lock ” button, press the “ lock ” and
the “ unlock ” buttons together� This action turns on the Unauthorized Transmitter
Alert feature and at the same time programs the transmitter or controller to operate
the system�
Once the Unauthorized Transmitter Alert feature is turned on, the warning will
sound for 48 hours after any transmitter programming� This feature can only be
turned off again by sending the system back to Omega for a reset�
Standard Programming: This method to program additional or replacement trans-
mitters does not affect the Unauthorized Transmitter Alert (UTA) feature� Before you
begin, have all transmitters which are to operate the system at hand�
Step 1 Then, turn the ignition “on”�
Step 2 Within 5 seconds of Step 1, press the Valet Switch 5 times� The siren/horn will
briefly sound, confirming that the system is ready to learn a transmitter code.
Step 3 Press the “ lock ” button on each transmitter one at a time� The system will
chirp the siren/horn once to confirm that each was learned. If a code is not received
within 10 seconds of Step 2, the learning process will automatically exit�
Programming Transmitters