Excalibur AL-1650-EDPB, Руководство по эксплуатации

Страница: 14 / 20

14
User Programmable Features (cont’d)
Feature #9 - Confirmation Chirp Volume
medium high (press “ trunk ” button to program) - DEFAULT
Low (softest) (press “ lock ” button to program)
medium Low (press “ unlock ” button to program)
high (loudest) (press “ start ” button to program)
This feature allows the choice of four different volume levels of the system’s confirma -
tion chirps, and when programming it, the buttons can be repeatedly and sequen -
tially pressed, thus making it easy to hear and choose the setting with the best chirp
volume�
Feature #10 - Alarm Duration
30 Seconds (press “ lock ” button to program) - DEFAULT
60 Seconds (press “ unlock ” button to program)
90 Seconds (press “ trunk ” button to program)
120 Seconds (press “ start ” button to program)
This feature allows four choices of the Alarm Duration, which is the period of time for
which the system sounding the siren (and/or horn, optionally) and flashes the parking
lights when it is triggered� Caution: Before lengthening the Alarm Duration you
should always check and determine if there are any local anti-noise or nuisance
ordinances in your area, to avoid the possibility of receiving a
violation citation.
Feature #11 - Flashing Light Confirmations
On w/ Disarm, Flash w/ RS (press “ unlock ” button to program) - DEFAULT
On w/ Disarm & Remote Start (press “ lock ” button to program)
On During Remote Start (press “ trunk ” button to program)
Flashing During Remote Start (press “ start ” button to program)
This feature affects the parking light confirmations for system disarm & remote start
functions� With the above options, you can select any combination of:
- Flashes twice after disarm
- Flashes twice then stays on for 30 seconds after disarm
- Stays on during remote start mode
- Flashes slowly during remote start mode
Feature #12 - 2nd Channel (Trunk Release) Also Disarms System
On
(press “
lock
” button to program)
- DEFAULT
Off (press “ unlock ” button to program)
“2nd channel” is most commonly used for trunk release, in which case the alarm
should also disarm. This feature, turned on, configures the system to disarm when
the 2nd channel is used�
Feature #13 - Arming Delay
3 Seconds (press “ lock ” button to program) - DEFAULT
15 Seconds (press “ unlock ” button to program)
30 Seconds (press “ trunk ” button to program)
45 Seconds (press “ start ” button to program)
This determines how long the alarm waits to monitor trigger inputs after arming the
system� Longer durations allow some vehicle systems to “settle” before monitoring to
prevent false trigger conditions�