Excalibur AL-1650-EDPB Скачать руководство пользователя страница 10

10

The Status Light (cont’d)

flash a number of times to indicate exactly which zone(s), has been violated. It will 

store the last 2 violated circuits and continually repeat the flash pattern until the sys

-

tem is disarmed and the vehicle’s ignition key is turned On� 

2 FLAShES:

 hood trigger

3 FLAShES: 

Door trigger

4 FLAShES:

 Sensor port trigger

REmOTE START STATUS (GREEn LiGhT):

OFF:

 The remote start is off and in standby mode�

On COnSTAnT:

 The remote start is in valet mode�

FLAShinG SLOw: 

The engine was started successfully and is running�

FLAShinG FAST: 

The remote start sequence has begun and is in process of starting 

the vehicle’s engine�

REmOTE START DiAGnOSTiCS (GREEn LiGhT):

  The remote start system can also indicate which zone caused the last remote 

start cycle was ended� To see this indicator, place the system into alarm valet mode� 

Immediately after the chirp, the GREEN status light will flash to indicate what caused 

remote start to end�

1 FLASh:

 Run time expired�

2 FLAShES:

 Brake pedal was pressed�

3 FLAShES:

 Engine stalled or a bad tach signal�

4 FLAShES:

 Received transmitter command to stop�

5 FLAShES:

 gear selector was moved from park(or the parking brake was released)�

6 FLAShES: 

The alarm was triggered or low battery voltage�

COmBinATiOn inDiCATiOnS:

  This indication reflect combinations of functions involving the security system AND 

remote start�

SLOwLY ALTERnATES GREEn/RED:

 System is in full valet mode�

SOLiD GREEn w/ RED FLASh:

 System is in remote start valet w/ the alarm armed�

SOLiD RED w/ GREEn FLASh: 

System is in alarm valet w/ remote start activated�

FAST ALTERnATES GREEn/RED:

 Alarm armed w/ remote start activated�

SLOw FLAShinG GREEn w/ 1-4 RED FLAShES:

 Zone violation recall during 

remote start mode�

SLOw FLAShinG RED w/ 1 GREEn FLASh: 

System is armed and ready to remote 

start in manual transmission mode�

Anti-Carjacking Protection

  The system is equipped with two separate Anti-Carjacking protection features (igni

-

tion, open door, or both)�  All are programmable, and must be turned on to operate�  

Once activated, the user has 53 seconds to cancel the Anti-Carjacking protection 

process (described below)�  If Anti-Carjacking is not cancelled, 53 seconds after being 

activated the siren will begin to chirp for 7 seconds to alert the user that the system 

is about to enter into an alarm condition�  The Valet Switch may still be pressed once 

during this period to cancel the Anti-Carjacking process�

  If the Anti-Carjacking process is not cancelled before the 60 second countdown 

expires, the system will enter an alarm condition, sounding the siren and flashing the 

parking lights�   30 seconds after this occurs, or should the ignition be turned off in the 

meantime, the stater interrupt will engage� Once the system enters the alarm condi-

Содержание AL-1650-EDPB





















Отзывы: