Options:
Panic
(
press
“disarm/unlock” button to program
)
4th Channel
(
press “
II
” button to program
)
5th Channel
(
press
“
III
” button to program
)
This feature changes how the controller’s or transmitter’s “
III
” button operates.
Normal operation, or the default setting, has the “
III
” button operate the 3rd Channel
output (press the button twice within 5 seconds). This feature allows changing it to
instead operate panic or either of the two other optional channel outputs (see the
Complete Programmable Features Matrix on page 33). Panic can always be
operated, by the alternative methods of pressing either the “arm/lock” and “disarm/
unlock” button for 3 seconds.
Page - 30
Feature #22 Doorlocking Functions
Factory Default Setting
.8 Second Lock & Unlock Output
(
press
“arm/lock” button to program
)
Options:
3 Second Lock & Unlock Output (
press
“disarm/unlock” button to program
)
Double Pulse Unlock Output
(
press
“
II
” button to program
)
Total Closure Lock Output
(
press
“
III
” button to program
)
This single feature gives the installer several needed options, to match the security
system’s doorlocking outputs to suite different vehicle requirements.
•
The first setting (programmed by the “arm/lock” button) has the system
produce both the lock and unlock outputs as .8 second in duration. This is the
most common form of output needed, which interfaces most vehicles.
•
The second setting (programmed by the “disarm/unlock” button) changes the
lock and unlock outputs to be a longer 3 second pulse output. This is for certain
vehicles which require a longer output pulse from the system’s control unit;
typically cars having vacuum pump systems, although the longer setting is also
more suitable in some newer vehicles.
•
Some newer vehicles require a double pulse output to remotely unlock the doors
and/or to disarm a factory-equipped security system, which is what the Double
Pulse Unlock setting provides (it is programmed by the “
II
” button ). The lock
output pulse, in this setting, is .8 second.
•
The Total Closure Lock Output (programmed by the “
III
” button) may be used
with vehicles which are originally equipped with the total-closure feature.
Typically, a total closure feature is when locking the vehicle’s doors if the key
in the door is held to “lock” for a period of time the vehicle will close all
windows and the sunroof, in addition to locking the doors.
Selecting this feature setting changes the system’s door lock output pulse from
a .8 second to as long as a 28 second duration output. The unlock output is 3
seconds in this setting.
Note:
When this feature is turned on, during the 28 second period after arm-
ing the system, the lock output can be stopped on demand by the user by
the ignition switch, the supply wire behind the fuse block or the fuse/junction block.
Never just insert the Red wire or any other security system wire behind a fuse. Also,
please note that connecting directly to the battery's Positive terminal will expose this
connection to failure due to a corrosive environment unless the connection has a
protective coating.
Yellow Wire - (Ignition Input):
The Yellow wire is an ignition "on"
input to the security system. This connection is critical to the proper operation of
many of the security system's features.
CONNECTION:
This wire supplies Positive 12 Volts to the control module
whenever the ignition switch is "on". This connection should be made at the ignition
switch harness, to the primary ignition circuit. Primary ignition has 0 Volts when
the ignition key is in the "Lock", "Off" and "Accessory" positions; and Positive 12
Volts in the "Run" and "Start" positions. Locate the correct wire at the ignition
switch harness and securely splice the Yellow wire to it.
Orange Wire - (Negative Output While Armed); Includes the
thick Red & White Wires attached to the relay socket - (Starter
Interrupt):
The Orange wire is a starter interrupt output, which is active when
the security system is in an armed state; the relay that it is attached to the Orange wire
prevents the starter from engaging, if a starting attempt is made while the system is
armed.
CONNECTION:
The typical starter interrupt is shown here-
Page - 7
Dash-
mounted
Ignition
Switch
Relay
Starter Disable White
wire to the
Starter Solenoid
side of the cut
wire.
Starter
Solenoid
Starter
Motor
Starter Disable Red
wire to the Ignition
Switch side of the
cut wire.
Starter
Disable
Socket
5-Pin
Connector
Socket
Orange
wire
Excalibur
Control
Module
Starter Disable
Connections
