
FR
EN
DE
12
FILTRATIONS SYSTEMS
The appliance is equipped with 2 filters and an aroma diffuser foam.
• Anti-dust filter: Washable filter to capture dust and small particles
that pollutes the air.
- H
2
0 Filter: Air cooler filter kept wet to refresh the warm ambient
air. Filters bacteria and other particles, to diffuse a healthier and
fresher air.
- Foam filter: Aroma diffuser foam filter, on which you can pour a few
drops of essential oils or fragrance to diffuse a fresh and perfumed
air in your room.
WATER TANK
When you want to switch on the Cooler function, make sure that there
is water in the tank.
Pull the tank outwards then add water using an appropriate recipient.
(See diagram below).
.
Warning : Make sure that the water level is constantly kept under the
“MAX” indicator. If the appliance is used on Cooler Mode, the water
level must be kept above the “MIN” indicator
.
• The filters are properly in place.
• The water tank is correctly placed.
• There is enough water (not below the “MIN” indicator).
• There is not too much water (not above the “MAX” indicator).
COOLING BLOCKS
Instructions for use:
1. Place the cooling blocks in the freezer until they are completely
frozen.
2. Place the cooling blocks in the water tank, which already contains
water, then put the tank back into the correct position. Make sure
that it is properly in place before using the appliance.
Two cooling blocks are supplied with the appliance and they will
allow you to reduce the temperature of the water and thus reduce the
temperature of the room.
The cooling blocks allow you to reduce the temperature and maintain
a lower temperature for several hours.
WARNING: Do not open the cooling blocks. Do not ingest the contents
of the cooling blocks.
WARNING : Cooling blocks has to be disposed on the water tank as
the picture above. Do no place the cooling blocks in the water pump
area.
REMOTE CONTROL
Appliance On/Off
Cooler mode
Oscillation On/Off
Timer
Mode control
Speed control
1. When
diagram
positioning
2. Remove
control and place the 3V CR2032 inside.
3. Avoid
4. Batteries
When
from
Please
CLEANING AND MAINTENANCE
• Always
• Clean
any water.
• If the
(add
• Do not use corrosive detergents, corrosive solvents or chemical
products.
• Do
clean the appliance.
• Do
• Ensure that the motor and the other electrical components do not
come into contact with water.
• If the
carefully.
affected
• Clean
brush.
THIS
WARRANTY
This
begins
conditions.
direct
use, accidents,
your receipt/invoice
The accessories
warranty pertaining to them is limited to one (1) month.
Multicool_A4.indd 12
Multicool_A4.indd 12
20/11/19 10:19
20/11/19 10:19