DE
FR
EN
DE
11
the
used as
not go
the
appliance when moving it or putting it down to
the
water
will be
as a
filling
over
when it has water in. Remove the drain plug located
water
out. In order to avoid damaging the appliance, make
before
In order to avoid any leakages, empty the water
appliance,
electricity
because
minimum
other
check
“MIN”
the
SPECIFICATIONS
Model
MULTICOOL
EAN code
3 046 171 904 720
Power
45 W
Air flow
6,5 m/s
Water tank
Yes – 5,5 L
Ice box
Yes – 2
Filters
Yes – Anti-dust,
H
2
O et Aroma diffuser foam
LED indicators
Yes
Remote control
Yes – Battery CR2032
Modes
Yes – Normal, Natural, Night
Oscillation
Yes – Automatic
Tilt
Yes – Manual
Timer
8H
Integrated handle
Yes
Wheels Yes
Voltage
220 - 240 V~
Frequency
50 Hz
Product dimensions (WxDxH)
W26 x D34 x H72 cm
Produit weight
4.9 kg
INSTRUCTIONS OF USE
BEFORE USING APPLIANCE FOR THE FIRST TIME
1. Please read these instructions carefully before using the appliance
and keep them for future use.
2. Check that the voltage of your local electricity network complies
with the one which appears on the appliance.
3. Before using the appliance for the first time, remove the appliance’s
protective films, stickers or any advertising elements.
APPLIANCE ON/OFF
Press this button to switch the appliance on. An audible “beep”
will be emitted.
When the appliance is switched on for the first time, the default mode
will be normal ventilation at low speed - this will be indicated by
the LED indicator lights.
Press this button
again to switch the appliance onto standby
mode..
SPEED CONTROL
Press this button in order to control the ventilation speed of the
appliance.
The sequence will be as follows:
Low speed
➔
Medium speed
➔
High speed
➔
Low speed
(…)
The LED indicator light will display the selected speed.
TIMER
Press this button to activate the timer. The LED indicator light will
show whether the timer is set to stop the appliance after 1 hour, 2
hours, 4 hours or 8 hours. If the timer has not been activated, there
will be no LED indicator light on the timer.
OSCILLATION ON/OFF
When the appliance is switched on, press this button to activate
automatic horizontal oscillation. Press it again to switch oscillation
off.
Fan blades of vertical oscillation can be tilted manually.
MODE CONTROL
When the appliance is switched on for the first time, the default
ventilation mode will be set to Normal .
Press this button to change the appliance’s ventilation mode.
The LED indicator light will show whether the ventilation is activated
in Normal , Natural or Night mode.
Normal mode: The ventilation speed selected (low, medium or
high) will remain constant. .
Natural mode: When this mode is activated, ventilation speed will
alter to provide a similar effect as a natural breeze.
Select Low ventilation speed for a Natural ventilation mode with a
soft breeze.
Select Medium ventilation speed for a Natural ventilation mode with
a medium breeze.
Select High ventilation speed for a Natural ventilation mode with a
strong breeze.
Night mode: When this mode is activated, the appliance will firstly
operate at the selected speed. Ventilation speed will then slow down
every 30 minutes before operating at low speed until the appliance is
switched off manually or automatically via the timer function.
The LED display lights will alter as the speed decreases.
Note: When the appliance is switched on, the brightness of the LED
indicator lights will be dimmed after 60 seconds if no other buttons
are pressed. Maximum brightness will be restored when a button is
pressed again.
Note: The appliance will memorise the use settings. When the
appliance is switched on, the ventilation settings chosen when it
was previously switched off will be applied again (except with Timer
function and Night Mode).
If you switch the appliance on after having unplugged the electricity
cable or after a power cut, the appliance will apply the default settings
when switched on – Low Speed and Normal ventilation mode.
COOLER MODE
Press this button
to switch on the Cooler function. Press the
button again to switch this function off.
Note: When this mode is activated, the pump in the appliance will
stop automatically when it has been operating for 10 hours.
Filter drying mode
Press the speed control button for approximately 3 seconds. The
High Speed icon will flash three times and filter drying mode will
start up.
This operation lasts for 20 minutes and for this period only the On/Off
button will be active. All of the other buttons will be deactivated.
After 20 minutes, the appliance will automatically go into standby
mode.
Multicool_A4.indd 11
Multicool_A4.indd 11
20/11/19 10:19
20/11/19 10:19