EWM M3.7X-M, Руководство по эксплуатации

Страница: 9 / 35

Machine control
– Operating elements
Overview of control sections
099-0M37XM-EW501
16.07.2018
9
4.1.1 Control section A
Figure 4-2
Item Symbol Description 0
1 JOB-
LIST
Welding task push-button (JOB)
Select the welding task from the welding task list (JOB-LIST). The list can be found
inside the protective cap on the wire feeder and in the appendix to these operating
instructions.
2
Click wheel welding power
• ----------- Setting the welding power
> see 4.3.2 chapter
• ----------- Setting various parameters values depending on the preselection.
The white signal lights (LED) around the rotary knob light up when setting is possible.
3
Operating mode selection push-button
--------- Non-latched
-------- Latched
--------- Special latched
4
Display of arc dynamics
The height and orientation of the set arc dynamics are displayed.
5
Correction of arc length click wheel
• ----------- Setting the arc length correction
> see 5.2.1.5 chapter
• ----------- Setting arc dynamics
> see 5.2.1.6 chapter
• ----------- Setting various parameters values depending on the preselection.
The white signal lights (LED) around the rotary knob light up when setting is possible.