Ewellix CASM-100, Инструкция по установке, эксплуатации и обслуживанию

Страница: 14 / 30

14
CA S M -1 0 0
WARNING
Risk of injury and material damage due to insufficient
fastening!
Only use fastening bolts and secure them adequately. Do not use
screws to install. Never loosen or remove screws on the actuator.
6. During installation, ensure that the applied force is al-
ways directed on the center of the actuator.
WARNING
Risk of injury and material damage due to incorrect
installation!
During installation, do not subject the actuator to side-impact or
to turning forces.
7. Ensure that the linear actuator is not impacted in its
movement over the entire stroke area . Consider collision
tests of the application.
8. Ensure that the installation requirements of the options
have been met.
9. Affix prohibition and warning labels for the application
onto the linear actuator, if necessary (⮑ 2.5.1 Warning
labels, page 7).
10. Start set-up for reference travel with limited load and
speed: CASM-100: 1 x 10–3 J maximum
NOTICE
Do not reach the mechanical limit of the drive during operation.
Doing so will result in irreversible damage to the drive.