Ewellix CASM-100, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 30

6
CA S M -1 0 0
6
2.0 Safety
This chapter provides an overview of all important safety
precautions for protection of personnel as well as safe and
trouble-free operation.
Disregarding this manual and the safety precautions speci-
fied therein may result in increased risk of serious injury or
death.
2.1 Intended use
The device has been designed and built exclusively for its
intended purpose as described in these instructions.
The device is only to be used as a dynamic centric com-
pression or tensile-loaded lift. It will be implemented in in-
dustrial and construction technology applications.
WARNING
Risk from misuse!
Any utilization of this actuator beyond its intended purpose may
lead to potentially hazardous situations.
Therefore:
• Strictly adhere to all safety precautions and instructions in this
manual.
• Do not allow this actuator to be subjected to weather conditions,
strong UV rays, corrosive or explosive air media as well as other
aggressive media.
• Do not modify, retool or change the structural design or individual
components of the actuator.
• Never use the actuator outside of the technical application and
operational limits.
2.2 Responsibility of the
owner and processor
The device is designed for personal use and is also used in
commercial applications by owner or processors.
The processor is the contracting partner of the reseller or
the manufacturer. The processor installs the device in a
complete system (application).
Any injury, damage or loss caused by violation of these in-
structions will be the responsibility of the customer.
In addition to following the safety instructions in this manual,
the owner or processor must do the following concerning
the safety and accident prevention guidelines and environ-
mental protection regulations applicable to the site of the
system’s installation:
• Inform themselves of applicable industrial safety regula-
tions and use risk assessment to determine additional
hazards that arise due to the specific working conditions
prevailing at the site where the device is installed. The risk
assessment must be implemented in the form of work in-
structions for device operation.
• Must confirm that the work instructions created for the
system including the device satisfy current legal require-
ments and modify the instructions if they don’t.
• Clearly regulate and specify the responsibilities for instal-
lation, operation, maintenance, and cleaning the system.
• Ensure that all employees who deal with the device have
read and understood this manual.
• Provide personnel with the required protective equipment.
• Must train personnel at regular intervals and inform per-
sonnel of the hazards .
In addition, owner must ensure that the device is in ade-
quate working condition. They must do the following:
• Ensure that the maintenance intervals described in these
instructions are complied with.
• Have all safety devices inspected regularly for function and
completeness.