Evoqua WALLACE & TIERNAN DEPOLOX 5 E, Инструкция по эксплуатации

Страница: 67 / 92

DEPOLOX
®
5 E flow cell
Retrofit kits, spares and accessories
6.
67
9 Insert the optional sensor measuring module cards in the
provided slots. See chapter 6.3.3 “DFMe electronics module”.
10 When installing the SiDiSens LF module and/or the membrane
sensor, the CAN extension socket (H - Figure 2) must also be
retrofitted. To do this, break out the indent on the housing
underside of DFMe electronics module and fit the CAN
extension socket (H - Figure 2). Check that all gasket inserts
are correctly mounted.
11 Fit the housing cover of DFMe electronics module and secure
with the four cover screws. Tighten the housing screws to a
maximum torque of 0.7 Nm (± 0.15 Nm).
12 Hook DFMe electronics module by the mounting hook (D -
Figure 2) onto DEPOLOX
®
5 E flow cell and secure on the
underside with the securing screws.
Figure 2 Cross-section, DFMe electronics module
A Multi-sensor
B Sensor cable Cl
2
free
C LED glow stick
D Mounting hook
E
pH sensor module
F Redox sensor module
G Motherboard DFMe with Measurement input Cl
2
H CAN extension socket
I
CAN connection socket to 700 P electronics module or 700 M
electronics module
A B C
E
F
D
H
I
G